Omron 3F88L-160 - Installation Environment

2-8
D 3F88L-RS15W
16
max.
350 max.
43 dia.
39 dia.
16.5±0.5
33.32+0/–0.05
6–0.004/–0.016 dia.
2-2-2 Installation Environment
Take precautions with the installation environment to improve the reliability and to fully
utilize the functions of the Cam Positioner system.
H Do not install the Unit in the following locations.
• Locations subject to direct sunlight.
• Locations subject to ambient temperatures or relative humidities outside the following ranges.
Ambient temperature: 0° to 55°C (Cam Positioner Unit) and –10° to 80°C (Resolver)
Ambient humidity: 10 to 90 % (with no condensation).
• Locations subject to condensation as the result of severe changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
H Take appropriate and sufficient countermeasures when installing the
Unit in the following locations.
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields and magnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
Design Chapter 2