2-20
Note 1. Use M3.5 round or forked crimp terminals for functional ground and protective ground termi-
nals.
6.2 mm
max.
w Round crimp terminal w Forked crimp terminal
6.2 mm
max.
Note 2. Reinforced insulation or double insulation must be used for the DC power supplies used as
I/O power supplies in order to comply EC Directives.
Note 3. The control I/O power supply must be turned ON to operate the control output circuit.
D Control Output Specifications
Item Specification
Maximum switching capacity 24 V DC –15%/10%, 0.3 A/point
Leakage current 0.1 mA max.
Residual voltage 1.5 V max.
ON response time 0.5 ms max.
OFF response time 1.0 ms max.
Internal circuit
RUN
M-DET
ERROR
Design Chapter 2
To Next Page
Loading...
