2-29
D Wiring Example
The following wiring example is for four-digit display of the Resolver speed.
Signal name Pin No.
Display data
Common cam
output terminal
1-digit LE signal
2-digit LE signal
3-digit LE signal
4-digit LE signal
Cam Output Connectors
Blue
Green
Yellow
Orange
Red
Purple
Gray
White
Black
M7F Display Unit
12 to 24 V DC
Case mark
Power
supply
input
Power
supply
output
CAM13 (CAM29)
CAM14 (CAM30)
CAM15 (CAM31)
CAM16 (CAM32)
A8
A5
A4
A3
COM/0V A2
CAM12 (CAM28) A7
CAM16 (CAM32) A8
CAM16 (CAM32) A9
CAM16 (CAM32) A10
ę
Ĝ
V
Note 1. The cam output signal names not in parentheses will be displayed for 3F88L-160 Cam Posi-
tioners and the names in parentheses will be displayed for 3F88L-162 Cam Positioners.
Note 2. The circled terminal numbers have been provided for convenience. When assembling the
socket, pay attention to the direction of the polarity guide and connect the wires as shown in
the above terminal layout.
Note 3. The case mark (Y) indicates the first digit of the M7F terminal number and is different from the
connector Y mark described previously.
Note 4. A display example is shown below.
w Resolver speed display
Unit Nameplate
rpm
Design Chapter 2
To Next Page
Loading...
