Chapter 7
7-49
Configurator Settings
7-3-2 OUT Tab Page
Use the OUT Tab Page to make settings for multi-function outputs.
Item Details Reference
No. The settings in the No. field are as follows:
00: Multi-function contact output, 01: Multi-function output 1, 02:
Multi-function output 2
---
I/O Comment Set a user-defined name for each terminal. 7-2-11 Connected Device
Comment
Detection Mode Set the detection mode to either Cumulative ON Time or Contact
Operations Counter.
Note: When the setting is made in the setting window, the setting
will be displayed in the Detection Mode field.
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
Value Set the monitor value (time or count).
Note: When the setting is made in the setting window, the setting
will be displayed in the Value field.
Fault Action Set the status of the output terminal when a communications error
occurs.
Note: When the setting is made in the setting window, the setting
will be displayed in the Fault Action field.
---
Double-click the selected field or click the Edit Button.
To Next Page
Loading...
