Omron ACCURAX G5 - Page 542

12-30
12-2 Parameter List
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
12
Appendix
528 Default Display
31 Accumulative operation time h
0 to 35 Yes
32 Automatic Motor Recognition Function −
33 Driver temperature °C
35 Safety status monitor −
531 Axis Number Set the axis number for communication. 1 − 0 to 127 Yes
532
Command Pulse
Input Maximum
Setting
Set the maximum command pulse input.
4000 kpps
250 to
4,000
Yes
533
Pulse
Regeneration
Limit Output
Setting
Set the detection of pulse regeneration limit error.
0 − 0 to 1 Yes0 Disabled
1 Enabled
535
Front Key
Protection
Setting
Set the operation limit for the front panel.
0 − 0 to 1 Yes0 Operation not blocked
1 Operation blocked
Pn number
Parameter
name
Explanation
Default
setting
Unit
Setting
range
Power
supply
OFF to
ON
Setting