Omron AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR HEM-703CP - Troubleshooting Error Symbols

10
When Error Indication Symbols Appear
The following special error symbols will appear in the display if the unit is being used incorrectly:
ERROR SYMBOL CAUSE CORRECTION
1 Cuff underinated 1) Release air pressure in cuff
2) Wait 10 minutes before taking
another reading
3) Repeat “Instructions for Use”
steps except inate cuff 30
mmHg higher than previous
ination value
2 Movement during
measurement
Residual air pressure
in cuff
1) Release air pressure in cuff
2) Wait 10 minutes before taking
another reading
3) Repeat “Instructions for Use”
steps
Cuff overinated (more
than 300 mmHg)
No pulse or blood
pressure reading due to:
1) Motion
2) Very weak artery
oscillation