7
about 1 inch
Artery
no space
Preparations for Use
6 Attach the Cuff
This cuff has eliminated the need for a
microphone thereby lessening possible
interference from vibrations and noise Fitting
also has been made much easier through the
widening of the artery oscillation detection
area
1 Place the cuff on the left arm so that the air
tube lies across the center of the arm
3 Place your arm on a table or a support with
the palm facing upward so that the cuff is
placed at the same level as the heart
2 Wrap the cuff pulling in a diagonal angle
securely so that the cuff tab is positioned
about one inch above the elbow joint of the
inner your left upper arm (Over the brachi-
al artery)
There should be no space between the
cuff and your arm
NOTE: If you have any difculties wrap-ping
cuff by yourself, we recom-mend that
you ask someone to wrap the cuff for
you
To Next Page
Loading...
