78
3-2. User Default Settings
ABI Remeasurement
This sets the base ABI value that determines whether or not a second measurement will be
performed.
Measurement Delay
Set the delay time from the end of the first measurement to the start of the second measurement
for "synchro measurement" and "ABI remeasurement".
Select from the [10 sec] to [120 sec] buttons. The default setting is [10 sec].
Selections Description
OFF
Do not judge whether or not to perform a second measurement using the
base ABI value.
ON
When the measured ABI is lower than the set value, automatically perform
a second measurement.
Set the base ABI value within the range of 0.30 to 1.40.
BP-203RPE3(A).fm 78 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
