Omron CP1H-X40D - Page 490

456
Temperature Sensor Units Section 7-5
In this example, 100 times the temperature data for temperature input 0 is
stored in binary form in D100 to D102.
Temperature Unit Flag (0: °C, 1: °F)
Open-circuit Flag (0: Normal, 1: Error)
Bit
D100
D101
D102
15 14 13 12
Always 0
11 10
8
7531
Always 0 Always 0 0 0
Temperature input 0 CIO 2
Leftmost data
Rightmost data
CIO 200
9 6
4
20
×16
5
×16
4
×16
3
×16
2
×16
1
×16
0
×16
7
×16
6
1000.01
#0000
D102
A200.11 (First Scan Flag)
MOV(021)
2
#0020
MOVD(083)
2001
#0100
D103
2
#7FFE
CMP(020)
1000.00
P_On (Always ON Flag)
P_EQ
100.00
SET 02001
2
2000
1000.00 2.13 (open-circuit detected)
2.15 (leftmost digits)
2.15 (leftmost digits)
2.15 (rightmost digits)
2000
#0300
2001
2000
#0011
2002
SET 1000.02
RSET 100.01
MOV(021)
(1)
Sets D103 and D102 to #0100 and
#0000, respectively.
Detects completion of input 0 initialization.
ON when input 0 has been initialized.
Open-circuit alarm output
MOV(021) (2)
Leftmost digits moved to CIO 2000.
(3)
(4)
(5)
Leftmost and rightmost digits
rearranged and moved to CIO 2002
and CIO 2001.
MOVD(083)
MOVD(083)
Data rearrangement completed.