xiv
Part VI: Sensor Unit
Section 1 provides the features and system configuration relating to the Sensor Unit and dedicated sen-
sor modules.
Section 2 provides the nomenclature and switch settings for the CQM1-SEN01, CQM1-TU001, E3X-
MA11, E3C-MA11, and E2C-MA11.
Section 3 describes the connections between the CQM1-SEN01 and E3X-MA11, E3C-MA11, E2C-
MA11, and CQM1-TU001.
Section 4 provides information on the operation of the CQM1-SEN01.
Section 5 provides information on the operation of the CQM1-TU001 Remote Console.
The Appendix provides the specifications for the Units.
Part VII: Linear Sensor Interface Units
Section 1 provides the features and system configuration relating to the Linear Sensor Interface Unit.
Section 2 provides an explanation of the scaling, timing hold, measured value, teaching, forced-zero
shift, and monitor output functions.
Section 3 provides the nomenclature, and terminal and indicator functions of the Linear Sensor Interface
Unit.
Section 4 describes the connections of the Linear Sensor Interface Unit.
Section 5 describes the basic operation of the Linear Sensor Interface Unit using the Programming Con-
sole.
Section 6 describes the applied operation of the Linear Sensor Interface Unit using the Programming
Console.
Section 7 provides details on the commands and responses of the Linear Sensor Interface Unit.
The Appendices provide the specifications, block diagram, data processing timing, and troubleshooting
for the Units.
Part VIII: Temperature Control Units
Section 1 lists the Temperature Control Unit model numbers and the basic specifications for each Unit.
Section 2 describes the features and operation of the CQM1-TC20j/TC30j Temperature Control Units.
Section 3 describes the features and operation of the CQM1-TC00j/TC10j Temperature Control Units.
The Appendix provides the specifications for the Unit.
To Next Page
Loading...
