Omron FH-L550 - Page 174

l
Mounting of the Back Side
Clearance: 50 mm
Clearance: 50 mmClearance: 50 mm
Clearance: 30 mm
Clearance: 30 mmClearance: 30 mm
Clearance: 30 mm
10055
Four, M4 depth 6.5
59 10.5
• Recommended tightening torque: 0.54 to 0.6 N•m
•
The tolerance: ±0.2 mm
l
Mounting the DIN rail
Mount DIN rail mounting bracket: FH-XDM-L, to the four mount holes on the back of the Sensor
Controller.
5 Setup and Wiring
5-16
FH Series Vision System Hardware Setup Manual (Z366-E1)