39
13.Blood Pressure Measurement
EN
5. The pressure will begin to decrease once the
optimal pressurization value is reached. [Fig. 5]
* Once deflation has started, you can reinflate by pressing
START (Start measurement) button.
* If you wish to facilitate deflation after deflation has started,
press the F1 key [DEFLATE]. It facilitates deflation by
approximately 5 - 10 mmHg each time it is pressed.
6. The strength of the pulse wave is displayed (Pulse
Wave Level) with a bar during measurement. [Fig. 6]
7. Deflation continues until finished, followed by a
return to the initial screen. [Fig. 7]
[Fig. 5]
[Fig. 6]
[Fig. 7]
To Next Page
Loading...
