Omron HEM-9000AI - Memory Retrieval: Data Detail View; Accessing Detailed Measurement Results

50
16.Memory Retrieval
16.4. Data Detail
Displays patient’s detailed measurement results.
1. On the [DATA BASE-ALL DATA-] or [PATIENT
DATA] List screens, move the [ ] cursor to a data
entry to access more detailed data from that
measurement. [Fig. 8]
The total number of data entries and the current data number
displayed are shown in the lower left.
Use the [ ] keys to scroll up or down among individual
data entries.
Use the [ ] keys to scroll through data in blocks of five or
seven entries at a time.
2. Press the SET button to display the single
measurement data in detail. [Fig. 9]
Use the [ ] keys to display the results of each measurement pulse wave.
This will be displayed only if pulse wave data is stored.
3. Press the F1 key [EXIT] to return to the initial screen.
Pressing the other function keys results in the actions listed above.
[DATA BASE-ALL DATA-] screen
[Fig. 8]
F1 key EXIT Return to the pre-measurement screen.
F2 key DATA LIST Enter the Data List screen.
F3 key EDIT/REPLACE ID
Edit or replace the ID information (Refer to Section 17.2.
for “Edit” and Section 17.3. for “Replace”.)
F4 key PATIENT DATA Return to the Patient Data List screen.
F5 key EDIT BP
Opens the Blood Pressure Modification screen.
F6 key PRINT
Print the measurement results.
Refer to Section 15.1. for details on printing results.
SET button Trend Graph Display the trend graph.
STOP button CANCEL Return to the default screen.
[Fig. 9]
AGE WHEN MEASURED
BIRTH DATE
HEIGHT
MEASUREMENT
INFO.
DATE
NOTES
WEIGHT
BMI
PATIENT INFO.