EasyManua.ls Logo

Omron HEM-9000AI - Trend Graph

Omron HEM-9000AI
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
16.Memory Retrieval
EN
16.6. Trend Graph
Identifies trends within an individual patient’s multiple measurements.
1. Press the F4 key [TREND GRAPH] on the [ALL
DATA] or [PATIENT DATA] screens, or press the
SET button on the [DETAILS] screen. A trend over a
1-day time will be displayed. [Fig. 14]
* Data that can be used to display a trend graph is limited
to those patients with IDs.
Press the F5 key [SELECT GRAPH] to change the
display from 1 DAY to 30 DAYS to 360 DAYS to cSBP-
SBP contrast graph.
* When the number of measurements in a day is quite
large and you display the [DAY] trend graph, the device
will thin out measurement values for you. [Fig. 14]
The [30 DAYS] shows a graph of the measurement
results for the previous 30 days starting from the date of
the selected result. [Fig. 15]
The [360 DAYS] shows a graph of the measurement
results for the previous 360 days starting from the date
of the selected result. [Fig. 16]
Press the [ ]* key to show a graph that is newer than
the date/time of the selected results.
Press the [ ]* button to view a graph that is further in the
past. This will work only if there are measurement results
recorded from before and after the date/time of the
selected results.
When several measurements are taken for a certain
period of time, the data with higher priority will be
displayed on the graph. Only one piece of data every 10
minutes on [1 DAY] graph, one piece of data every 6
hours on [30 DAYS] graph and one piece of data every 3
days on [360 DAYS] graph are automatically selected
and displayed, respectively.
Data is selected in the following priority.
1) data containing a measurement of both blood pressure
and AI.
2) data containing a measurement of AI.
3) data containing a measurement of blood pressure.
When multiple pieces of data contain the same type of
data, the newest one will be selected.
When the data contains a measurement of high blood
pressure with more than 200 mmHg, it will be displayed
with
on the graph.
[Fig. 14]
1 DAY
30 DAYS
[Fig. 15]
360 DAYS
[Fig. 16]
cSBP-SBP contrast graph
[Fig. 17]

Table of Contents

Related product manuals