Omron HEM-9000AI - Replacing Patient IDs; 17.3. Replacing Patient IDs

63
17.Registering ID Information
EN
17.3. Replace ID
It is possible to select the saved measurement results and replace the ID number.
1. Move the [ ] cursor to a data entry you wish to
replace on the [DATABASE-ALL DATA-] or
[DATABASE-PATIENT DATA-], and press the F3 key
[REPLACE ID]. [Fig. 17]
2. The ID Entry screen will appear. [Fig. 18]
3. Press the F1 key [SAVE] after an ID is input.
[Fig. 19]
F3 key move one character back
F4 key move one character forward
F5 key delete the previous character
If it is a new ID, it will proceed to ID Registration. Input ID
information. (Refer to Section 17.1.)
4. The screen goes back to [DATABASE-ALL DATA-]
or [DATABASE-PATIENT DATA-], and the new ID
number will be displayed. [Fig. 20]
[Fig. 17]
[Fig. 18]
[Fig. 19]
[Fig. 20]