Omron HEM-9000AI - How to Change the Setup

66
18.Configuration Options
18.2. How to Change the Setup
You can change the HEM-9000AI’s initial setup according to your needs.
Memory card ejection and initialization can also be performed under this setup process.
1. Press the F5 key to enter the [SETUP] screen.
[Fig. 1]
2. The [SETUP] screen is displayed. [Fig. 2]
Move the [ ] cursor using the [ ] buttons to
select from the menu column then press the SET
button or the [ ] button.
When the F1 key [EXIT] or [EXIT] on the menu is pressed, all the changes will be completed. If the
STOP key [CANCEL] is pressed, the changed will be cancelled except the date and hospital name.
[Fig. 1]
Screen of [AI AND BP MEASUREMENT]
[Fig. 2]
Select the
setup menu
Move the [ ]
cursor to the
item you wish
to set.
Select the setup
item’s preferred
setting value
Press the
[SET] button