Omron HEM-9000AI - Setting Al Measurement Length

68
18.Configuration Options
5. To change the amount of time between blood pressure measurements.
When selecting [AVERAGE - 2 TIMES] or [AVERAGE - 3 TIMES], it is possible to set the
interval between blood pressure measurements.
1. Move the [ ] cursor to [AVERAGE - INTERVAL TIME].
[Fig. 6]
2. Press the SET or [ ] button to move the [ ] cursor to
[SETTING VALUE].
3. Move the [ ] cursor to the desired interval, selecting
from [30 sec], [1 min], [2 min] or [3 min].
The default setting is [1 min]. [Fig. 7]
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
6. To change the [MEASUREMENT LENGTH] under [AI
MEASUREMENT]:
1. Move the [ ] cursor to [Measurement Length]. [Fig. 8]
2. Press the SET or [ ] button to move the [ ] cursor to
[SETTING VALUE].
3. Move the [ ] cursor to the desired measurement time,
selecting from [15 sec], [30 sec], [1 min] or [3 min].
[Fig. 9]
The default setting is [30 sec].
The measurement time set here is the duration of the pulse
wave sampling.
The total time required for measurement is slightly longer.
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
[Fig. 6]
[Fig. 7]
[Fig. 8]
[Fig. 9]