Omron HEM-9000AI - Resetting to Default Settings; 18.8. Resetting to Default Settings; Restoring System Settings to Defaults

78
18.Configuration Options
18.8. Returning to the Default Settings
It is possible to restore the system settings to the default settings.
Hospital name will remain.
1. Press the F5 key to enter the [SET UP] screen.
(Refer to Section 18.2.)
2. Move the [ ] cursor to [OTHER SETTINGS] under
the [MENU] column and press the SET or [ ] button
to move the [ ] cursor to [SETTING LIST]. [Fig. 1]
3. Return to default settings.
1. Move the [ ] cursor to [CLEAR SETTINGS]. [Fig. 2]
2. Press the SET button.
The confirmation “Return to default settings?” will be
displayed. Press the F2 key [YES] to restore the
default settings. [Fig. 3]
Press the F1 key [CANCEL] to avoid restoring the
defaults settings.
The original system settings will be restored in
approximately 3 seconds.
After executing [CLEAR SETTINGS], the previous
settings cannot be recovered.
3. Press the F1 key [EXIT] to return to the default screen.
[Fig. 1]
[Fig. 3]
[Fig. 2]