Omron MicroHAWK V320-F - Page 164

8-19
8 Advanced Settings
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
8-6 I/O
8
8-6-2 Symbol Grading
 Unused ECC
Disabled
The unused ECC is not formatted as part of the symbol output.
Enabled
The unused ECC is formatted and attached to the decoded data as a value.
 15415 Grading Logic Output and Threshold 1 - 3
This parameter defines the 15415 parameter and threshold that if fallen below will assert the appropriate
output. The output must be configured to output on 15415 validation before these settings apply.
 Output on Overall Grade
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Overall Grade Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Symbol Contrast
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Symbol Contrast Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Modulation
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Modulation Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Reflectance Margin
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.