Omron MicroHAWK V320-F - Page 165

8 Advanced Settings
8-20
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
 Reflectance Margin Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Fixed Pattern Damage
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Fixed Pattern Damage Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Axial Non-Uniformity
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Axial Non-Uniformity Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Grid Non-Uniformity
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Grid Non-Uniformity Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Unused ECC
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Unused ECC Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Overall Grade
The overall is calculated in accordance with the ISO 15415 specification. The overall grade is the
lowest individual parameter grade seen during the individual scan.
Grade Metrics