Omron MicroHAWK V320-F - Page 359

Appendices
H-22
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
 Symbol Contrast Threshold
 Print Growth Threshold
 Axial Non-Uniformity Threshold
 Unused Error Correction Threshold
Usage: Lets the user set the acceptable level of symbol quality.
Definition: Conforms to ISO/IEC 16022 symbol quality grading (A,B,C,D).
Serial Cmd: <
K800, output on symbol contrast, symbol contrast threshold ,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold>
Default: Grade C
Options: 0 = Grade A
1 = Grade B
2 = Grade C
3 = Grade D
Usage: Lets the user set the acceptable level of symbol quality.
Definition: Conforms to ISO/IEC 16022 symbol quality grading (A,B,C,D).
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold,output on print
growth, print growth threshold ,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold>
Default: Grade C
Options: 0 = Grade A
1 = Grade B
2 = Grade C
3 = Grade D
Usage: Lets the user set the acceptable level of symbol quality.
Definition: Conforms to ISO/IEC 16022 symbol quality grading (A,B,C,D).
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity, axial non-uniformity
threshold
,output on UEC,UEC threshold>
Default: Grade C
Options: 0 = Grade A
1 = Grade B
2 = Grade C
3 = Grade D
Usage: Lets the user set the acceptable level of symbol quality.
Definition: Conforms to ISO/IEC 16022 symbol quality grading (A,B,C,D).
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,
UEC threshold >
Default: Grade C
Options: 0 = Grade A
1 = Grade B
2 = Grade C
3 = Grade D