13
3. Preparing the nebulizer for use
7. Attach the air tube.
1) Twist the air tube plug slightly and push it firmly into the air tube
connector on the compressor.
2) Twist the air tube plug slightly and push it firmly into the air tube
connector on the medication tank.
Notes:
• Make sure that the air tube is securely attached to the compressor and
nebulizer kit, and does not come loose. Twist the air tube plug slightly
when inserting it into the air tube connectors to avoid the air tube
disconnecting during use.
• Take care not to spill the medication when attaching the air tube. Keep
the nebulizer kit upright.
3) Use the nebulizer kit holder as a temporary holder for the nebulizer kit.
Note:
Align the mark on the unit with the mark on the nebulizer kit as shown.
NE-C801S-ID_B_M.book Page 13 Friday, December 16, 2011 11:46 AM
To Next Page
Loading...
