Omron NJ Series Troubleshooting Manual

3 Error Tables
3-166
NJ-series Troubleshooting Manual (W503)
5401549A hex Master Axis Position Type Selection
Out of Range
Instructions W502
5401549B hex Auxiliary Axis Position Type Selection
Out of Range
Instructions W502
5401549C hex Target Position Ring Counter Out of
Range
Instructions W502
5401549D hex* Axes Group Composition Axis Setting
Out of Range
Instructions W502
5401549E hex* Axis Use Setting Out of Range Instructions W502
54015700 hex* Homing Parameter Setting Out of
Range
Instructions W502
54015702 hex* Axis Use Change Error Instructions W502
54015703 hex* Cannot Change Axis Use Instructions W502
54015720 hex* Motion Control Parameter Setting
Error When Changing Axis Use
Instructions W502
54015721 hex* Required Process Data Object Not
Set When Changing Axis Use
Instructions W502
54015722 hex* Actual Position Overflow/Underflow Instructions W502
54015723 hex* Switch Structure Track Number Set-
ting Out of Range
Instructions W502
54015724 hex* Switch Structure First ON Position
Setting Out of Range
Instructions W502
54015725 hex* Switch Structure Last ON Position
Setting Out of Range
Instructions W502
54015726 hex* Switch Structure Axis Direction Out of
Range
Instructions W502
54015727 hex* Switch Structure Cam Switch Mode
Out of Range
Instructions W502
54015728 hex* Switch Structure Duration Setting Out
of Range
Instructions W502
54015729 hex* Track Option Structure ON Compen-
sation Setting Out of Range
Instructions W502
5401572A hex* Track Option Structure OFF Compen-
sation Setting Out of Range
Instructions W502
5401572B hex* Number of Array Elements in Switch
Structure Variable Out of Range
Instructions W502
5401572C hex* Number of Array Elements in Output
Signal Structure Variable Out of
Range
Instructions W502
5401572D hex* Number of Array Elements in Track
Option Structure Variable Out of
Range
Instructions W502
5401572E hex* Numbers of Elements in Output Sig-
nals and Track Option Arrays Not
Matched
Instructions W502
5401572F hex* Motion Control Instruction Multi-exe-
cution Disabled (Master Axis)
Instructions W502
54015730 hex* Motion Control Instruction Multi-exe-
cution Disabled (Position Type Selec-
tion)
Instructions W502
54015731 hex* Same Track Number Setting in Switch
Structure Out of Range
Instructions W502
Event code Event name Functional classification Reference

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model