7 Tag Data Link Functions
7-26
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
2
Select Export Global Variables
−
Network Configurator... from the Tools Menu.
Any global variables with Input or Output set for the Network Publish attribute are imported from
the csv file for the import procedure described below (Importing to the Network Configurator).
z Importing to the Network Configurator
Precautions for Correct UsePrecautions for Correct Use
Variables with a Network Publish attribute that have variable names that are the same as the I/O
memory address notation, such as “0000” and “H0000” are not exported to CSV files.
1) Variable names that contain only single-byte numerals (Example: 001)
2) Variable names with the following single-byte letters (uppercase or lowercase) followed by sin-
gle-byte numerals
• H (Example: H30)
• W (Example: w30)
• D (Example: D100)
• E0_ to E18_ (Example: EA_100)
1
Double-click the icon of the device registered in the Network Configurator for which you want to
import the variable with a Network Publish attribute to display the Edit Device Parameters Dialog
Box.
Right-click the icon to display the pop-up menu, and select Device
−
Parameter
−
Edit.
2
Click the Tag Sets Tab at the top of the Edit Device Parameters Dialog Box. Select Import from
File
from the To/From File Button.
A confirmation dialog box is displayed that asks you how you want to import the variables as
shown below.
To Next Page
Loading...
