7 Tag Data Link Functions
7-40
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
Use the following procedure to connect to the built-in EtherNet/IP port via the USB port on the CPU
Unit.
1
Select the communications interface.
Select Option
−
Select Interface
−
NJ Series USB Port.
2
Select Network
−
Connect. The following dialog box is displayed.
3
Select TCP:2 and then click the OK Button.
4
Select the network to connect.
5
The Network Configurator will connect to the EtherNet/IP network. If the Network Configurator
goes online normally, “On-line” is displayed in the status bar at the bottom of the window.
6
The Network Configurator will connect to the EtherNet/IP network. If the Network Configurator
goes online normally, “On-line” is displayed in the status bar at the bottom of the window.
Connections through NJ-series CPU Unit’s USB Port
To Next Page
Loading...
