7-41
7 Tag Data Link Functions
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-6 Connecting the Network Configurator to the Network
Use the following procedure to directly connect to the built-in EtherNet/IP port via Ethernet. You can
connect to the built-in EtherNet/IP port even if the IP address has not been set on the computer.
1
Select the communications interface.
Select
Option
−
Select Interface
−
NJ Series Ethernet Direct I/F.
2
Select Network
−
Connect.
The Setup Interface Dialog Box is displayed if there are several Controllers that you can connect
to. Select NJ501-1@00 (IP number)
3
Select Network
−
Connect. The following dialog box is displayed.
4
Select TCP:2 and then click the OK Button.
Connections via Ethernet to NJ-series CPU Unit
To Next Page
Loading...
