5-25
5 Troubleshooting
NJ-series CPU Unit Hardware User’s Manual (W500)
5-2 Troubleshooting
5
5-2-3 Error Table
• Password of Restore by sys-
tem-defined variable in the
Controller Setup does not
agree with the _Card1Resto-
reCmd.Password system-
defined variable.
• The DIP switch on the CPU
Unit is not set to allow starting
the restore of SD Memory Card
backups by specification with
system-defined variables.
• There is no such folder as
specified by the system-defined
variable.
• Required files are not set to
transfer in the setting of the
system-defined variable.
102C0000 hex
(Ver. 1.03 or
later)
Restore
Operation
Failed
The restore opera-
tion ended in an
error.
• It was not possible to read the
data to restore.
• The SD Memory Card was
removed during a restore oper-
ation.
• Failed to restore Unit or slave.
• The SD Memory Card is dam-
aged.
S page 5-76
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info
To Next Page
Loading...
