4-4 Creating Screens
4
4
NP Introduction Manual 65
Creating Screens
You configured these settings in this section.
Level Meter (Level Meter)
Fixed Object (Text)
* Select [Bold] and [Center] from the toolbar.
Next, configure the function switches.
●Function Switches
The function switches open, close, and stop the shutter.
Since they are hardware switches on the front panel, set their properties only.
The function switches can have different function for each screen. Therefore you
must set the function for each screen, even if they are the same function. Repeat
this procedure to create all other screens in later chapters of this manual.
1. Click . Select [Momentary].
You will see the properties.
Item Setting
Read Address SERIALA:CNT00000
Border Color (Black)RGB(16,16,16)
Foreground Color (White)RGB(255,255,255)
Background Color (Black)RGB(16,16,16)
Display Format Left
Value [Detail] dialog box (Maximum Value: 3)
Low Region Color (Dark grey)RGB(128,128,128)
High Region Color (Light grey)RGB(224,224,224)
Item Setting
Label 1 (2, 3)*
Label Size 20
Label Color (Black)RGB(16,16,16)
Foreground Color (White)RGB(255,255,255)
Transparency Yes
To Next Page
Loading...
