BN50S / BN75S / BN100S / BN150S / BN220S / BN300S
6
45
4
Tighten the 2 screws.
5.
Insert a new battery into the UPS as far as it will go.
➀
●
Replacement battery pack
For BN50S/BN75S: Model BNB75S
Attach the plate cover in order of
➁
to
➂
.
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed.
➃
Do not pinch the cable with the plate cover.
6.
Insert the connector until it is locked.
➀
You may hear a “pop” sound when you connect the battery if it is replaced
after the unit’s operation is stopped, but this sound is not abnormal.
1
2
3
1
1
Battery connector
To Next Page
Loading...
