BN50S / BN75S / BN100S / BN150S / BN220S / BN300S
6
55
9.
Insert the connector until it is locked.
➀
You may hear a “pop” sound when you connect the battery if it is replaced
after the unit’s operation is stopped, but this sound is not abnormal.
10.
Attach the front panel.
Push the top of the front panel towards the main body taking care of the hook at the bottom.
➀
Use a screwdriver to securely tighten (clockwise) the 4 screws at the top of the front panel.
➁
11
Battery connector
1
2
Tighten the 4 screws.
Battery replacement is now complete.
To Next Page
Loading...
