Omron Powli BU1002SW - Page 60

BU1002SW / BU3002SW
47
6
7.
Attach the front panel.
Insert the lug at the bottom of the front panel into the hole in the main body
➀
and push it towards the
main body.
➁
Use a screwdriver to securely tighten (clockwise) the 2 screws at the top of the front panel.
➂
Battery replacement is now complete.
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運
転
1
2
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
3
■
Procedure for recycling the battery
<BU3002SW>
1.
Use a screwdriver to loosen (anti-clockwise rotation) the 4 screws on the front panel of the unit, until they
turn freely. (The screws cannot be removed from the front panel.)
Pull the front panel towards you to remove it.
➀
Disconnect by holding here.
2.
Remove the battery connectors from the lower plate cover
➀
and disconnect each of the connectors.
➁
2
1
Platecover
Batteryconnector
1
1
Tighten the
2 screws.
Loosen the
4 screws.