Omron Powli BU75RW - Page 53

BU75RW/BU100RW/BU200RW/BU300RW
4
41
(1) When the beeper stop switch is briefl y pressed (for less than 1 second), the next item is dis-
played.
(2) The unit enters the “individual item setting mode” when the beeper stop switch is pressed and
held (for more than 1 second).
(3) When the power switch is turned OFF, the setting mode quits and the unit enters power switch
OFF status (status
).
ColdstartON/OFFsetting
Outputvoltagesetting
Powersupplyoutputstopdelaytimesetting
Signalinput/outputtest
The UPS operation mode can be set if the power switch is turned ON while the beeper stop
switch is pressed.
Note: While in setting mode, output from the power supply output is OFF even if the power switch
is ON.
2. Settings