2 Models and External Dimensions
2-22
G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
Note 1 Different connectors are used for the motor power and the brake on 100-V and 200-V, 3,000-r/min
Servomotors of 50 to 750 W and Servomotors of 6 to 15 kW. When using a Servomotor with a brake, two
cables are required: a Power Cable without Brake and a Brake Cable.
2 For flexible power cables for Servomotors of 11 to 15 kW, refer to 4-2 Wiring (page 4-10) and make your
own cable.
Brake Cables (Standard Cable)
Specifications Model
[100 V and 200 V]
For 3,000-r/min Servomotors of 50 to 750 W
3 m R88A-CAKA003B
5 m R88A-CAKA005B
10 m R88A-CAKA010B
15 m R88A-CAKA015B
20 m R88A-CAKA020B
30 m R88A-CAKA030B
40 m R88A-CAKA040B
50 m R88A-CAKA050B
For 1,500-r/min Servomotors of 7.5 to 15 kW
For 1,000-r/min Servomotors of 6 kW
3 m R88A-CAGE003B
5 m R88A-CAGE005B
10 m R88A-CAGE010B
15 m R88A-CAGE015B
20 m R88A-CAGE020B
30 m R88A-CAGE030B
40 m R88A-CAGE040B
50 m R88A-CAGE050B
To Next Page
Loading...
