120 Viper 650 and 850 Robot with EtherCAT 21861-000 Rev A
0
1
0
20
30
40
50
60
70
80
0 20 40 60 80 100 120
Stopping Distance (deg)
Speed (%)
J3 Stopping Distance (Viper850)
Payload 33%
Payload 66%
Payload 100%
Figure 8-17. Stopping Distance in Degrees versus Speed (%) for Viper 850 Joint 3
0
0
.1
0.2
0.3
0.4
0.5
0 20 40 60 80 100 120
Stopping Time (s)
Speed (%)
J3 Stopping Time (Viper850)
Payload 33%
Payload 66%
Payload 100%
Figure 8-18. Stopping Time in Seconds versus Speed (%) for Viper 850 Joint 3
Stopping distances and times will not significantly degrade as a result of normal use within
the life of the robot. Stopping distance will vary only if there is an actuating mechanism fail-
ure, which may require replacement of the failed component.
If you want to measure stopping distances and time with your application, contact your local
OMRON support.
To Next Page
Loading...
