301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
Page 8 of 8
INSTRUCTION/INSTALLATION SHEET
lyriQ™ Standard Keypad
IS-0391 REV. D
©Copyright 2009 by On-Q/Legrand All Rights Reserved.
IR Repeat
Transmission
Default (src 1 & 4, vol. 2) is Multi-Burst Frequency
which is 40kHz and 56kHz.
IR Carrier Frequency at 40kHz
(src 1 & 4, vol. 1)
IR Carrier Frequency at 56kHz
(src 1 & 4, vol. 3)
Default is used for normal operation and
environments. The default will be effective for
the vast majority of source devices. Carrier
frequency can be changed if end user’s source
device does not respond to multi-burst.
IR Carrier Frequency Adjustments are
chosen based on end user’s remotes. (Most
devices are 40kHz. Cable and satellite boxes
are often 56kHz)
Restore Defaults
(src ALL, vol. NONE) Returns all setting to factory
defaults
Use for trouble shooting issues when
experiencing problems that may have been
caused by an installer setting.
To Previous Page
Loading...
General