WWW.ONEFORALL.COM 54 WWW.ONEFORALL.COM
S
etting up the UNIVERSAL AIRCON REMOTE using the
“
Auto search method”
1. Select one of device keys (e.g. DEV 1).
2. Press and hold `SET` key for 3 seconds
and`SETUP` will blink twice on the display and
then “PRE-CODE` will be displayed.
3. Use the arrow keys to select `AUTO` and press
`SET` to confirm.
4. Point the UNIVERSAL AIRCON REMOTE towards
your air-conditioner and press the arrow UP
key to start the Search Method.
Every selected code will automatically send
out its POWER function.
You can press the UP key to search upwards or DOWN key to
search downwards.
5. As soon as your air-conditioner switches
Off/On, press `SET’ to save the selected code
and ‘OK’ will be displayed.
Auto search method
To Next Page
Loading...
