To Next PageTo Next Page
Need help?Do you have a question about the One Stop Gardens 9018 and is the answer not in the manual?
General| Brand | One Stop Gardens |
|---|---|
| Model | 9018 |
| Category | Patio Furniture |
| Language | English |
Basic safety precautions to reduce risk of personal injury and equipment damage during product use.
Covers points 9-16 on page 3, including maintenance, alertness, damaged parts, alcohol, location, weather, and qualified technicians.
Step 1: Use screws to attach the brace to the table stand and align the umbrella stand.
Step 2: Attach two brackets to the underside of the table board using table screws.
Step 3: Attach the table stand to the brackets on the table board using screws.
Step 4: Connect the umbrella and pole using a screw, then slide the pole into the umbrella stand.
Step 5: Attach the chair board to the chair stand using four sets of screws.
Periodically check the hardware and tighten if necessary for optimal performance and safety.
Seal the set with marine quality varnish or paint if left outdoors during inclement weather.
