oneConcept TuneUp ST - Software Update; Factory Reset

28
EN
Weather You can enable or disable weather forecasting for the
standby screen. To do this, rst select the temperature
unit (°F or °C) and then proceed to set your location.
When you have activated this setting, the standby
screen alternately displays the time and the weather
forecast (the display changes every 10 seconds).
Playback
setting
Select the playback mode in the media center. You
can choose from O (no repeat or shule), Repeat all,
Repeat one, or Shule.
Language English/ German/ Español/ Français/ Portugese/
Nederlands/ Italiano/ Pyccknn/ Svenska/ Norske/
Dansk/ Magyar/ Cesky/ Slovensky/ Polski/ Turkce/
Suomi
software
update
If a new software version is available, your device will
alert you. Before updating the software, make sure that
a stable power connection is available. Unplugging the
power plug from the wall outlet during the software
update may damage the device.
Reset to
factory
settings
When the unit is reset to factory defaults, all settings
you have made will be erased and the unit will return to
the language selection.