4
Filling with salt.
This softener is designed to use block
salt. Fill the bin with block salt as
shown.
THIS SOFTENER CAN ONLY USE
BLOCK SALT. DO NOT USE
TABLET, GRANULAR OR FINE
SALT.
Operation.
Checking salt. Regularly check there is salt in
the salt compartment. If it is getting low, top
up with salt.
Turn off the softener. If you ever want to
turn off the softener you must, close the inlet
and outlet valves, and open the bypass valve.
Outlet Valve closed
Bypass
Valve
open
Inlet Valve closed
The softener will no longer operate.
Turn on the softener. To start the softener
operating again follow the instructions under
Setting to work.
To Previous Page
Loading...