Pet Clippers for Home Grooming (Model: X2)

The oneisall Pet Clippers (Model: X2) are designed for home grooming, offering a user-friendly experience for pet owners. This device is engineered to provide a comfortable and efficient grooming session for your pets, ensuring their coat remains well-maintained.

Function Description

The primary function of the oneisall Pet Clippers is to trim pet hair to desired lengths, making home grooming accessible and straightforward. The clipper features a ceramic blade with an acute angle, designed for precise and smooth cutting, which helps to prevent snagging and pulling, ensuring a more pleasant experience for your pet.

The clipper offers a versatile length adjustment system. It includes a 5-length fine-tuning blade adjustment, allowing you to set the blade length from 0.8mm to 2.0mm. This fine-tuning capability is crucial for achieving different hair lengths and styles. In addition to the blade adjustment, the clipper comes with a set of 6 limited combs, ranging in sizes from 3mm, 6mm, 9mm, 12mm, 15mm, to 18mm. These combs provide a wider range of length options for various coat types and grooming preferences, whether you're aiming for a crew cut or a longer side hair trim.

The device is equipped with an ON/OFF switch that also functions as a 1-2 speed setting control, allowing you to adjust the clipping speed according to your pet's coat density and your comfort level. This flexibility helps in managing different grooming tasks, from quick trims to more detailed styling.

Usage Features

Using the oneisall Pet Clippers involves a few simple steps to ensure optimal results and pet comfort. Before starting, it is recommended to wash and dry your pet thoroughly. If your pet's hair is excessively long, it's advisable to trim it with scissors first and comb it smoothly before using the clippers.

To determine the desired hair length, you first select the appropriate limit comb from the provided set (3mm, 6mm, 9mm, 12mm, 15mm, 18mm). These combs are easily installed by holding both sides and pushing them onto the button positions until they butt securely. It's important to ensure the comb is not loose to prevent it from falling off during use. Once the comb is in place, you can fine-tune the blade length by moving the button left and right to adjust the blade between 0.8mm and 2.0mm. For example, if you use the 12mm guide comb with the blade set to 1.0mm, the resulting hair length will be 13mm. If no guide comb is used, the hair will be shortened to the blade's set length (e.g., 1.0mm).

The clipper is designed for ease of use, with a clear working indicator that provides visual feedback on its operational status. The device is powered by a 2000mAh high-performance lithium battery, offering approximately 240 minutes of operating time on a full charge. Charging takes about 3 hours. The charging status is indicated by a series of lights (20%, 40%, 60%, 80%, 100%), allowing you to monitor the battery level. Similarly, the operating status display shows the remaining battery performance, ensuring you're aware of when a recharge is needed.

For safety and optimal performance, it's important to note that the product should not be disassembled, and the hair clipper itself cannot be washed. It should be kept away from wet conditions. Charging should be done within a specific temperature range, between 32°F and 104°F (0°C and 40°C). It's normal for the product to produce a little heat during use or charging.

Maintenance Features

Proper maintenance is key to extending the lifespan and ensuring the continued performance of your oneisall Pet Clippers. The device is designed for easy cleaning and blade maintenance.

Blade Removal and Installation: To clean the blade or replace it, you can easily remove it. First, press down the moving blade with your thumb. It's recommended to hold the clipper with your other hand to prevent the blade from falling off. For installation, adjust the adjusting ring to 2.0mm before inserting the blade. Then, direct the blade (B) at the hair clipper's slot (A) and plug it in. Finally, push the blade down until it clicks into place.

Taper Blade Cleaning: After each grooming session, it's important to clear up the blade using the provided cleaning brush. For a more thorough cleaning, the blade can be removed. The moving blade can be turned back to allow access for cleaning hair accumulated between the moving blade and the fixed blade. This ensures that hair does not impede the blade's movement or performance.

Taper Blade Maintenance: To keep the blades sharp and moving smoothly, lubrication is essential. Before and after each use, or as needed, maintain the blade by dripping some oil onto the red point places as indicated in the manual. A small amount of oil is included with the product for this purpose. Regular oiling helps reduce friction, prevents rust, and ensures a consistent cutting performance.

General Care: The product can only be cleaned with a cloth dampened with a little water or a mild soap solution. Avoid using harsh chemicals or submerging the clipper in water. When the battery runs out, it should be removed safely and returned to specified recycling places, not discarded casually. If the clipper is not used for a long time, it is recommended to charge it at least once every three months to maintain battery life.

By following these usage and maintenance guidelines, your oneisall Pet Clippers will remain a reliable tool for keeping your pet well-groomed at home.

oneisall X2 - Page 4

Table of Contents