6 7
We suggest you write down this code along with the jobsite
name, address and alarm number sequence (x of x). We
have provided a label you can use to ax to the side of each
carton where this information can be recorded to aid in the
proper distribution and installation at the jobsite. Put alarm
back in original carton for safety and transportation to the
jobsite.
4. Once setup is complete you must unpair alarms and delete
these homes from your Apple device.
Why? Unpairing keeps you from getting push notifications
whenever an event occurs in all the homes you have set up.
This also clears the alarms and unregisters them from the
cloud. Now the Homeowner can pair alarms to their
Apple devices once they occupy their new home and
begin receiving push notifications and controlling
their alarms.
You can unpair alarms either by going to the “Home
Settings” screen and “delete home” (easiest), swiping
left on each alarm so “unpair device” is visible or by going
to the “Settings” screen for each alarm and select “unpair
device” at bottom of screen. They are still interconnected
so the Building Inspector can test alarms. If needed, install
Onelink hardwired alarms to standard hardwired alarms as
noted in first section of this guide.
VOICE ALARM
Language
English
FIRMWARE
Serial Number
4F705F2E-5CFC-4CE(-AE23-9F7FABB15049
Announcement
Child’s Bedroom
Room
Nick’s Room
Home
123 Main Street
Receive Push Notifications
Settings
PRODUCT INFORMATION
Identify
Names Used by Siri
Device Identifier
AC10-60F3
Battery Life 95%
Firmware Version 1.00.081.5000.052.01
unpair device
Jobsite ______________________________
Address _____________________________
Alarm ____ of ____Prod Code _____-_____
JOBSITE LOCATION
INFORMATION
Deerfield Subdivision
123 Main Street
AC10 A9CC 2 3
Sample Completed Jobsite Sticker
To Next Page
Loading...