OneTouch Vario Flex Quick Start Guide

Turn it on
Press and hold until the
start-up screen appears.
Quick Start Guide
OneTouch Verio Flex™ Blood Glucose
Monitoring System
1
Set the time and date on your meter
Use this guide to get to know your meter, and follow the steps
inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
Set the time on the first SET screen
> Hour flashes. Press
if correct
or edit and confirm.
> Minutes flash. Press if correct
or edit and confirm.
2
Take a test
Insert a test strip (gold side and
2 silver prongs facing you) to
turn the meter on.
Flashing blood drop
appears.
Apply blood sample to the
channel on either side of
the test strip. Wait for the
channel to fill.
The channel turns red and
the meter counts down
from 5 to 1.
Use
buttons to edit each
setting and press to confirm.
Set the date on the next SET screen
> Year flashes. Press
if correct
or edit and confirm.
> Month flashes. Press if
correct or edit and confirm.
> Day flashes. Press if correct
or edit and confirm.
Ready to test
Your meter setup is complete when
the screen with 3 dashes appears.
AW 06933301B

OneTouch Vario Flex Specifications

General

Device Type	Blood Glucose Meter
Measurement Range	20-600 mg/dL
Test Time	5 seconds
Display	LCD
Operating Conditions	10-40 °C, 10-90% RH
Sample Size	0.4 μL
Connectivity	Bluetooth
Storage Conditions	-20-70 °C (-4-158 °F); 10-90% relative humidity