9
Q13: How much blood do I need for the
OneTouch Verio® test strip?
A13: The OneTouch Verio® test strips require 0.4 µL of blood
to obtain a result. You can apply blood to either side
of the test strip. Holding the meter at a slight angle,
guide the channel to the blood drop. When it touches
your sample, the test strip wicks the blood into the
channel. The channel should fill completely, turn red
and the meter will count down from 5 seconds.
Blood should not be applied to the top of the test
strip or the top edge of the test strip.
Q14: Where can I purchase
OneTouch Verio® test strips?
A14: You can purchase OneTouch Verio® test strips
at your local pharmacy.
To Next Page
Loading...
