126
8
Adjusting meter settings
3. Highlight On or O and press
In Basic Mode, Test Tracker and Range Indicator are
removed from the Features Menu.
Basic Mode uses pre-set general range limits which are
different from the ones set during first time setup. See
page121 for information on adjusting range limits.
Turning the Test Tracker on or o and
setting a Daily Test Goal
1. From the Settings Menu, press or to highlight
Features and press
The Features Menu indicates the current Test
Tracker setting.
NOTE: If Basic Mode is selected the Test Tracker will
not appear in the Features Menu.
2. Highlight Test Tracker and press
To Next Page
Loading...
