27
2
Setting up your system
NOTE: Whether you turn the meter on for the first time
using
or a test strip, you will need to perform first
time setup.
Use the display backlight for better visibility
The backlight comes on automatically whenever the
meter is turned on. After a few seconds of no activity, the
backlight will dim. Pressing any button or inserting a test
strip will turn the backlight back on.
First time setup
Before using your meter for the first time, you will be
prompted to set the language, time, date, range limits,
Daily Test Goal, and 90 Day Average Target.
To Next Page
Loading...
