49
3
Taking a test
4. Adjust the depth setting
The device has 13 puncture
depth settings (each dot shown
between numbers 1 to 7 on
the Depth Wheel indicates an
additional available depth
setting). Adjust the depth by
turning the depth wheel. Smaller numbers are for a
shallower puncture and larger numbers for a
deeper puncture.
NOTE: Try a shallower setting first and increase the
depth until you find the one deep enough to get a blood
sample of the proper size.
5. Cock the lancing device
Pull the slider back until it
clicks. If it does not click, it
may already have been cocked
when you inserted the lancet.
To Next Page
Loading...
