Set up your system 1
33
NOTE: To help ensure that the
time and date in your meter are
set correctly, once every 6 months
a screen will prompt you to
confirm the time and date set in
the meter.
If they are correct, press
. If
not correct, press or to
highlight Edit Time/Date and
press . Follow the steps in
page28 to adjust the time and date. Once the time and
date are set correctly, press or to highlight Done
and press . After a few seconds, the Main Menu will
appear on the screen.
If you turned the meter on by inserting a test strip, the
Apply Blood screen will be displayed.
To Next Page
Loading...
