Care and maintenance 5
93
Cleaning your meter, lancing device and
cap
The meter and lancing device should be cleaned whenever
they are visibly dirty. For cleaning obtain regular strength
liquid dish soap and a soft cloth. Prepare a mild detergent
solution by stirring 2.5mL of regular strength liquid dish
soap into 250mL of water.
• Do Not use alcohol or any other
solvent.
• Do Not allow liquids, dirt, dust,
blood or control solution to
enter the test strip port or the
data port. (See page12.)
• Do Not spray cleaning solution
on the meter or immerse it in
any liquid.