Filter Application - General Information
This filter is designed for use in domestic/residential swimming pool
installations with correctly sanitised fresh or salt chlorinated water. Suitable
for use with sand or Zelbrite lter media.
1. Locate the lter system as close to the pool as practical.
2. Place the lter on a level stable foundation, preferably a concrete
pad or paving.
3. Position all equipment to provide ease of access for future
servicing.
4. Protect the lter and pump from weather and direct sunlight by
ensuring that they are properly housed.
5. Ensure there is sufcient space to provide adequate ventilation to
electric pump motor.
6. Clean a new pool as well as possible before lling pool and
operating lter. Excess dirt and large particles of foreign matter in
the system can cause serious damage to the lter and pump.
7. Ensure pump is compatible with lter specications.
5
To Next Page
Loading...
Need help?
General