6
Installation
Hazardous Pressure
Incorrectly installed or tested equipment may fail, causing severe
injury or property damage. Read and follow instructions in owner’s
manual when installing and operating equipment.
Have a trained pool professional perform all pressure tests.
All glued ttings and pipe work should be allowed to dry to
atmosphere for 24 hours before closing the installation. Failure
to do so could cause injury or installation failure.
The ttings on these lters are constructed of ABS. Some PVC
jointing compounds are incompatible with ABS possibly causing
failure to the product. Check compound suitability prior to use.
Installation & Assembly of Internal Components
Installation of lter should be only carried out by qualied personnel. Ensure
that the under-drain assembly (hub, laterals & tube) are properly assembled
& installed prior to adding lter media (sand).
Hazardous Pressure!
Can cause severe
injury or major property
damage from tank
explosion.
BEFORE WORKING ON
THE FILTER:
1. Stop Pump
2. Release all pressure from
system, by turning valve
handle to waste.
WARNING
Filter pumps require
hazardous voltage
which can shock, burn,
or cause death.
BEFORE WORKING ON
THE PUMP OR MOTOR:
Disconnect power to
motor.
To Next Page
Loading...
Need help?
General